Wireless Fall Bed, Chair and Floor Alarms

  • Print

The new Secure® WireLess® System takes fall management alarms to the next level by eliminating tripping hazards, removing the alarm sound from the patient room, and employing the most advanced, continuous 2.4G patent-pending bi-directional wireless communication which minimizes interference within a facility and ensures secure, instantaneous communication between components. Competitive wireless 433MHz bandwidth is a much more overcrowded bandwidth prone to interference. Upgrade to the highest quality, most cost effective wireless fall management alarm system available today!

  • Flexible Set-Up - Mount the alarm monitor away from the patient or resident in a variety of locations to maximize safety, eliminate tripping hazards, and reduce the “nuisance alarms” that are so prevalent in healthcare facilities today. Monitor may be mounted or placed outside of patient room up to 150 ft. away from the transmitter for a quieter in-room environment.
  • Reduce “Alarm Fatigue”– Alarm monitor can be mounted with wall mount (included) next to and connected to a facility’s existing nurse call system with alarm monitor sound set to mute, eliminating in-room alarm sound and alerting the nurse’s station when unsafe ambulation occurs (requires optional NCI-1 Nurse Call Interface Cable).  
  • WireLess® Bi-Directional Technology (Patent Pending) – When triggered, the transmitter instantly sends wireless signal to alarm monitor without the dangerous delay found in many other patient alarms. The alarm monitor then sends a confirmation signal to the transmitter to stop the transmitter signal, effectively conserving battery life.
  • Multiple Applications – In addition to WireLess® bed and chair sensor pads, the WireLess® alarm monitor and transmitter can be paired with all Secure® bed/chair/toilet sensor pads, floor mats, and alarming wheelchair seat belt. Simply insert the transmitter in our AMH-1 holder and connect to any of the aforementioned Secure® monitoring pads, mats and seat belt.  Make the switch to WireLess® without having to purchase new sensor pads!
  • Auto Reset - Alarm monitor automatically resets once the patient gets back on the bed/chair sensor pad. Alternatively, the monitor can be reset by pressing the reset button located on the front of the monitor. When using a floor mat sensor, the monitor will continue to alarm until the reset button is pressed.
  • Secure Connection – Alarm monitor and transmitter communicate every 5 minutes to confirm both remain safely synced. If the monitor and transmitter become unpaired the alarm monitor light will flash and the alarm will sound continuously indicating the system is not functioning properly.
  • Low Battery Indicators – Both alarm monitor and transmitter feature low battery indicators which alert staff and caregivers when new batteries must be installed. Batteries are included with both the alarm monitor and transmitter.
  • WireLess® Sensor Pads – Ultra-thin WireLess® bed & chair sensor pads are antimicrobial, latex-free, incontinent proof, and can be folded for storage. 
  • Wireless® Transmitter – Our unique Wireless® Transmitter can be removed and interchanged with our Wireless® Bed or Chair pad. Competitive wireless transmitters are sealed into the pads and cannot be removed.
  • 3x AA batteries included with the WAM-1 and 2x AAA with the WAT-1.
  • All components are covered by a one year warranty against defects and workmanship.